28Sep/21oTm

1 inch, 10×100, E-Recumbent fork

enSometimes, the only option is a custom solution for a particular situation. Below is a good example: a 1" fork for an E-Recumbent bike modification with a 250 motor front hub.

en Des fois le sur mesure est la seule option pour une solution a une situation particulière. Comme cette fourche 1" pour un vélo couché avec moteur de 250W dans le moyeu avant.

Material: Steel
Steering tube: 1" threaded, length 140mm.
Fork length: ca. 290mm (for 20x1.5" / 37-406 tire)
Offset: 20mm
Dropouts: Ø10mm, 100mm spacing, deep and thick to take 250W motor torque
Brake mount: ISO Ø160mm

PS: Fork tubes have to remain outside dropout inner surface, to avoid interference with motor hub

Filed under: Forks, Workshop By: oTm
Comments (0) Trackbacks (0)

Sorry, the comment form is closed at this time.

Trackbacks are disabled.